manualshive.com logo in svg

SMC Networks SMCD3GN, User Manual

Share
Download
SMC Networks SMCD3GN User Manual Download Page 20

Configuring Your Computer for TCP/IP 

Configuring Microsoft Windows XP 

Use the following procedure to configure a computer running Microsoft Windows XP with the 
default interface. If you use the Classic interface, where the icons and menus resemble 
previous Windows versions, perform the procedure under “Configuring Microsoft Windows 
2000” on page 19. 

1.  On the Windows taskbar, click 

Start

, click

 Control Panel

, and then click 

Network and 

Internet Connections

. 

2. Click the 

Network Connections

 icon. 

3. Click 

Local Area Connection

 for the Ethernet adapter connected to the Gateway. The 

Local Area Connection Status dialog box appears. 

4.  In the Local Area Connection Status dialog box, click the 

Properties

 button (see Figure 6). 

The Local Area Connection Properties dialog box appears. 

 

Figure 6. Local Area Connection Status Window 

5.  In the Local Area Connection Properties dialog box, verify that 

Internet Protocol (TCP/IP)

 

is checked. Then select 

Internet Protocol (TCP/IP)

 and click the 

Properties

 button. The 

Internet Protocol (TCP/IP) Properties dialog box appears. 

6.  In the Internet Protocol (TCP/IP) Properties dialog box, click 

Obtain an IP address 

automatically

 to configure your computer for DHCP. Click the 

OK

 button to save this 

change and close the Internet Protocol (TCP/IP) Properties dialog box. 

7. Click the 

OK

 button again to save your changes. 

8.  Restart your computer. 

20 

SMCD3GN Wireless Cable Modem Gateway User Manual 

Summary of Contents for SMCD3GN









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands