Configuring Your Gateway
Viewing Status Information
The Status page is a read-only screen that shows:
y
The connection status for the Gateway’s WAN/LAN interfaces.
y
Whether RG and NAT functions are enabled or disabled.
y
The current time and system uptime.
y
Internet and Gateway information.
y
The Gateway’s model name, software and hardware versions, RF cable and RG WAN
MAC addresses, and serial number.
y
Interfaces uptime and traffic count.
y
Network log, with buttons to clear the log and refresh its contents.
y
LAN client log, with buttons to refresh its contents and release the IP.
The Status menu appears when you first log in to the Web management interface. You can
also display it by clicking
Status
in the menu bar and then clicking the
Cable Status
submenu in the menu bar. Figure 35 shows an example of the status information shown.
58
SMCD3G Cable Modem Gateway User Manual
Summary of Contents for SMCD3G
Page 1: ......
Page 49: ...Configuring Your Gateway Figure 27 Trigger Menu 49 SMCD3G Cable Modem Gateway User Manual...
Page 68: ......
