SMC Networks SMCD3G, User Manual

Page: 45 / 68

Configuring Your Gateway
Table 11. Predefined Filter Menu Options
Option Description
Service List of predefined services from which you can choose.
LAN IPs Lets you specify any LAN IP addresses, a single LAN IP address, or a range of LAN IP
addresses to which the filter is applied.
Start IP To apply the predefined filter to:
• A single LAN IP address, enter the LAN IP address.
•
A range of LAN IP addresses, enter the starting IP address here and the ending IP address
range in the next field.
This field is unavailable if the Gateway is configured for any LAN IP addresses.
End IP Ending IP address in the LAN IP address range to which the filter will be applied. This field is
unavailable if the Gateway is configured for any LAN IP address or a single LAN IP address.
Adding a Customer-Defined Filter to Access Control
Using the following procedure, you can define special application services you want to block
from the Internet access.
1. In the Access Control menu, check Enable Access Control if it is not checked and click
the Apply button. The remaining fields in the menu become available.
2. Under Customer Defined Filtering Table , click the Add button. The Customer Defined
Filter menu appears (see Figure 25).
3. Complete the fields in the Customer Defined Filter menu (see Table 12). (Or click Back to
return to the Access Control menu or Cancel to cancel any selections you made.)
4. Click Apply . The Access Control menu reappears, with the customer-defined filter you
configured shown in the Customer Defined Service Table .
5. To configure additional filters (up to 35), repeat steps 1 through 4. When you finish, click
Apply in the Security Settings (Firewall) menu to save your settings.
6. To change the settings for a customer-defined filter, click the radio button to the left of the
filter you want to change and click the Edit button. When the Customer Defined Filter
menu appears, edit the settings as necessary (see Table 12) and click Apply . Click Apply
in the Security Settings (Firewall) menu to save your settings.
7. To delete a customer-defined filter, click the radio button to the left of the filter you want to
delete and click the Delete button. No precautionary message appears before you delete a
customer-defined service filter rule. Click Apply in the Security Settings (Firewall) menu to
save your settings.
45
SMCD3G Cable Modem Gateway User Manual