2
The following table describes the LEDs of the device.
LED
Status
Color
Description
Power
On
Green
The device is powered on and the initialization is normal.
Off
The device is powered off.
On
Red
The device is initializing.
Blinks
The firmware is upgrading.
Link
On
Blue
The Internet connection is normal.
Blinks
Data is being transmitted on the Internet.
Off
The Internet connection is failed.
WLAN
On
Green
The WLAN connection is established.
Blinks
Data is being transmitted through the WLAN interface.
Off
The WLAN connection is failed.
LAN4/LAN3/LAN2
/LAN1
On
Green
The LAN connection is normal and active.
Blinks
Data is being transmitted through the Ethernet interface.
Off
The LAN connection is failed.
Rear panel
The following table describes the interfaces of the device.
Interface
Function
Power switch, power on or power off the device.
Reset
Resets to the factory defaults. To restore factory defaults, keep the device powered on and
push a paper clip into the hole. Press down the button over 5 seconds, then release.
Power
Power interface, for connecting to the power adapter of 12 V DC, 1 A.
LAN1/LAN2/LAN3
/LAN4
RJ-45 interface, for connecting to the Ethernet interface of the PC or the Ethenet devices with
the cable.
Line
RJ-11 interface, for connecting to the ADSL interface or a splitter through the telephone
cable.
