-7-
Chapter 2 Hardware Installation
2.1 Panel Layout
2.1.1. Front Panel
The front panel features three 10/100 Mbps Ethernet ports, one Wide Area network
(WAN) port, and diagnostic LED indicators. The WAN port connects your DSL or cable
modem to the router. The LAN ports are used to connect to your computers or other
network devices. LEDs monitor the status of each port.
Figure 2-1 Front Panel
RESET:
To reset system settings to factory defaults, please follow these steps:
1. Power off the device,
2. Press the reset button and hold,
3. Power on the device,
4. Keep the button pressed for about 5 seconds,
5. Release the button,
6. Watch the M1 and M2 LEDs; they will flash 8 times and then M1 will flash
once per second.
Port:
