SMC Networks SMC2004 User Manual Download Page 6

Driver Uninstallation

Follow the steps below to remove the the SMC EZ Connect USB
Network Bridge driver from Windows system:

1. Click the 

Start

menu, point to 

Settings\Control Panel

. Double

click 

Add/Remove Programs

icon.

2. In 

Install/Uninstall

tab, select SMC EZ Connect 

USB Network

Bridge Driver V1.5.0.0

3. Click 

Add/Remove

button and then click OK.

4. Restart Windows system.

Troubleshooting

If you have successfully installed the driver, but can’t see either
your or the other computers’ names in Window’s Network
Neighborhood, please check the following points.

1. Make sure the EZ Connect USB 

Cable is firmly connected to the 
USB ports on your computer or 
USB hubs.

2. Click the 

Start

menu, point to 

Settings`Control Panel

. Double 

click 

Network

icon. In 

Identification

tab, ensure each 

computer has been given a 
unique name, not to conflict with 
each other. Make sure the 

Workgroup

name is the same for 

all the computers in the network

3. In 

Configuration

tab, check the 

“SMC EZ Connect USB Network 
Bridge Adpater”

is in 

The 

following network components 
are installed

list.

4. In 

Configuratio

n tab, click 

File 

and Print Sharing

button. Make 

sure both 

I want to be able to 

give others accesss to my files

and 

I want to be able to allow 

others to print to my printer(s)

functions are selected. It would 
cause the 

File and printer 

sharing for microsoft networks 
service

be installed and enable 

this computer to share its files and
printers to the others

After checking all these points, if the network is still not working
properly, please contact your supplier instead of revising the
settings by yourself unless you are an expert network user.

Disclaimer

Information in this document is subject to change without notice.
The manufacturer does not make any representations or warranties
(implied or otherwise) regarding the accuracy and completeness of
this document and shall in no event be liable for any loss of profit
or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.

No part of this document may be reproduced or transmitted in any
form by any means, electronic or mechanical, including
photocopying, recording or information recording and retrieval
systems without the express written permission of the manufacturer.  

All brand names and product names used in this document are
trademarks, or registered trademarks of their respective holders. 

English

English

Summary of Contents for SMC2004








Reviews: