SMC Networks SMC1233A-TX, Quick Start Manual

Page: 4 / 7

4 English
Windows 95/98/2000/ME Network
Driver Installation
All versions of Windows may not respond the same. The
typical steps are as follows:
1 . Restart your computer. Make sure you have your SMC
Installation CD and Windows 95/98 CD available for driver
installation procedures.
2. “New Hardware Found” window displays and loads “New
Hardware Wizard” program. “New Hardware Wizard” speci-
es the network hardware device (controller) to be installed.
Click “Next”.
3 . Select “Display a list of drivers in a specic location” so
that you can choose the driver you need. Click “Next”.
4 . Select the type of device from the list. Click on “Network
Adapters”. Click “Next”. Click “Have Disk”.
5 . You will be prompted to “Install from Disk”. Insert the SMC
CD containing the drivers and enter the path to the CD-ROM
(e.g. if your CDRom drive is called D: and you have Windows
95, your path will be d:\Drivers\Win95 ) and click “OK”. You
can also browse your computer to nd the location. Simply
click on Browse and select driver folder from your CDRom
drive.
6. Screen will display “SMC1233A-TX 10/100Mbps PCI NIC.”
Click “OK”.
7 . Your device will be recognised as a “SMC1233A-TX
10/100Mbps PCI NIC”. Click “Next”.
You may be prompted to restart your machine after the
installation is complete.