(PPA100 shown. Units: MPa)
Compact Manometer
Series
PPA
2
Description of Operating Parts
Operation and Functions
Power ON
Power OFF
• When pressed and held for 3
seconds or more, the power
turns OFF.
• When there is no button
operation for more than 5
minutes, the power turns OFF.
(auto power OFF function)
Initial Setting
1. The display will show
"Err" and then the power
should be turned OFF.
2. Press and hold for 6
seconds or more. The
unit will go into zero
clear. When this happen
s, "CAL" will appear on
the LCD.
3. When zero clear is
finished, the unit can be
operated.
"P" for peak display
"b" for bottom display
In lock mode
POWER button
• Power ON/OFF
• Peak mode switching
LCD
• Present pressure display
• Peak/bottom value display
• Units display
LIGHT button
• Turns on back light
MPa
POWER
LIGHT
MPa
POWER
LIGHT
POWER
LIGHT
MPa
POWER
LIGHT
MPa
POWER
LIGHT
MPa
POWER
LIGHT
• The power comes ON as it is
pressed.
• When pressed and held for 6
seconds or more, the unit goes
into zero clear.
Press the POWER
button.
Press and hold the
POWER button for
3 seconds or more.
Be certain to perform initial setting when using
for the first time and after changing batteries,
as the unit will indicate memory data error.
1. Press and hold the
POWER button for 3
seconds or more.
2. Press and hold the
POWER button for 6
seconds or more.
3. Release the POWER
button.
