SMC Networks PFMC7102-L, Operation Manual

Page: 32 / 98

-31-
No.PF
※※
-OMY0002
■
Default settings
Item (Main display) Default settings (Sub display) Page
[F 0]
[rEF ] Reference condition [ Std] Standard condition
Page 32
[Unit] Unit selection function

1
[ L] L/min
[NorP] SW output PNP/NPN setting [ PnP] PNP output
[i_o ] SW/external input setting

2
[ oUt] SW output
[F 1]
[oUt1] Output mode of OUT1 [ HYS] Hysteresis mode
Page 35
[1ot ] Switch operation of OUT1 [ 1_P] Normal output
[P_1 ] Set value of OUT1
50% of maximums rated flow range
[ 250] 250 L/min (500 L type)
[ 500] 500 L/min (1000 L type)
[1000] 1000 L/min (2000 L type)
[H_1 ] Hysteresis of OUT1
5% of maximums rated flow range
[ 25] 25 L/min (500 L type)
[ 50] 50 L/min (1000 L type)
[ 100] 100 L/min (2000 L type)
[dtH1] ON delay time [0.00] 0.00 s
[dtL1] OFF delay time [0.00] 0.00 s
[ CoL] Display colour of OUT1 [1SoG] Green when ON, Red when OFF (OUT1)
[F 2]

3
[oUt2] Output mode of OUT2 [ HYS] Hysteresis mode
Page 42
[2ot ] Switch operation of OUT2 [ 2_P] Normal output
[P_2 ] Set value of OUT2
50% of maximums rated flow range
[ 250] 250 L/min (500 L type)
[ 500] 500 L/min (1000 L type)
[1000] 1000 L/min (2000 L type)
[H_2 ] Hysteresis of OUT2
5% of maximums rated flow range
[ 25] 25 L/min (500 L type)
[ 50] 50 L/min (1000 L type)
[ 100] 100 L/min (2000 L type)
[dtH2] ON delay time [0.00] 0.00 s
[dtL2] OFF delay time [0.00] 0.00 s
[CoL ] Display colour of OUT2 [1SoG] Green when ON, Red when OFF (OUT1)
[F 3] [FiL ] Digital filter setting [ 1.0] 1.0 s Page 48
[F10] [Sub ] Sub display [ dEF] Standard (Set value of OUT1) Page 49
[F14] [Cut ] Zero cut-off setting [ 1.0] 1.0% Page 55
[F20] [inP ] External input setting

2
[ rAC] Accumulated value reset Page 56
[F22] [AoUt] Analogue output setting

4
[ 1-5] 1 to 5 V (Analogue voltage type)
[4-20] 4 to 20 mA (Analogue current type)
Page 57
[F30] [SAvE] Accumulated value hold setting [ oFF] Not held Page 58
[F80] [diSP] Display OFF mode [ oN] Normal display (Display ON) Page 59
[F81] [P in ] Security code [ oFF] Not used Page 60
[F90] [ ALL] Setting of all functions [ oFF] Not used Page 62
[F96] [S_in] Check of input signal No setting due to input signal setting Page 63
[F98] [tESt] OUT Output check [ n] Normal output Page 64
[F99] [ini ] Reset to the default settings [ oFF] Reset OFF Page 67

1: This setting is only available for models with the unit selection function.

2: This setting is only available for models with the external input.


3:
Only available for models with switch outputs for OUT2.

4: This setting is only available for models with the analogue output.