66
Back to Zero Disk
User does not need to press HW “reset “ button 15secs to back to zero disk
again. User can click the “
Back to Zero Disk
“of Advanced.
CAUTION:
Please make sure to backup your data before doing a Back to Zero
Disk Install! The “Back to Zero Disk” will erase your NAS firmware / stored data
and prepare for new installation!
1.
Click “
Back to
Zero Disk
” on the “
Advanced
” page and the following
screen appears, allowing you to back to software installation STEP 3.1.5. to
change the preferred RAID configuration.
2.
Enter the “
Administrator password
.”
