- 8 -
No.JXC#-OMX0009-A
PC
● USB cable
(A-miniB type)
Part No.:LEC-W2-U
位 置
速度
100
500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
位 置
速度
100
500
200
1000
50
200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度
200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
•Controller
communication cable
Part No: JXC-W2A-C
2.2 Product configuration
An example of the controller structure is shown below.
●Electric actuator
*1
*4
CC-Link
Prepared by user
*5
●Controller
*1 *5
注
5)
● Actuator cable
Part No.:
LE-CE-#-#
*3
● Power supply plug (Included)
Part No.: JXC-CPW
<Applicable wire size>
AWG20 (0.5 mm
2
)
*1 These items are included when ordered using the part number for an
Electric
actuator set.
*2 Latest version of the controller setting software must be used.
Software can be downloaded from SMC website. https://www.smcworld.com/
*3 24 VDC power supply for controller input and 24 VDC power supply for I/O signal should be
separated
*4 Be sure to prepare a terminating resistor and a PC.
*5 Optional.
Warning
Refer to
5. External Connections
for wiring.
Refer to
“18. Precautions for wiring and cables”
when handling the wiring and cables.
Do not connect the teaching box, LAN equipment, or LAN cable directly to a PC.
Otherwise, the controller, PC or equipment may be damaged.
PLC
*3
To ENC
To MOT
Power supply
DC24V
Controller power supply
(24 VDC)
To PWR
To SI
Terminating
resistance
● Communication connector
LEC-CMJ-#
● Teaching box
(3 m cable is provided)
Part No.:LEC-T1-3#G#
or
*2
Option
•Conversion cable
Part No.: P5062-5
