11
Sensor head
Detection hole
6-2. Detection range
Electrostatic sensor installation distance and detection range are shown below.
Installation
distance mm
Detection range
mm
10
45
20
85
25
100
30
120
40
150
50
180
Installation
distance mm
Detection range
mm
25
100
30
120
40
150
50
180
60
205
70
225
75
235
6-3. Cautions on installation
When an object other than measured object is installed close to the electrostatic sensor, the
sensor output can be different from actual value due to the effect of charged potential of installed
object. Don’t place the object, which is not to be measured, or the sensor head cable around the
sensor detection hole. Brackets to fix the sensor shall not be covered with insulation layer such
as paint or surface treatment.
When installing the object around the electrostatic sensor, keep the object which is not to be
measured apart more than minimum installation interval in the table below.
Installation
distance mm
Min. installation
interval mm
10
20
20
40
25
45
30
55
40
65
50
75
60
90
70
100
75
105
Electrostatic sensor is affected by electric field or electromagnetic field due to its operation
principle.
If the cable, transmitter, or wireless equipment that carries large amount of current is present by
the sensor head, correct detection of static electricity could be disabled.
Avoid using the sensor where those components are present.
IZD10-110
IZD10-510
In
s
tallat
ion
dis
tanc
e
Min. installation interval
Sensor head
Object that is not to be measured
Charged object
Ins
tal
lat
ion
di
s
ta
nc
e
Detection range
Detection hole
Sensor head