![background image](http://html1.mh-extra.com/html/smc-networks/idfa60-23-c/idfa60-23-c_operation-manuals_1299718018.webp)
IDX-OM-V020
Chapter 3
Transportation and installation
3.2
Installation
IDFA60/70/80/90 Series
3-4
3.2.4
Drain tube
- A drain tube of 12mm O.D. is included as an accessory. The outlet end of the tube is released to
atmosphere and lets the drain flow through the tube.
(When customers prepare the drain tube, keep its length at 5m or less and the I.D. at 8mm or larger for
correct operation of the auto drain)
- Using the pressure of the compressed air, the drain will be discharged periodically. Fix the outlet end of
the tube so as not to swing during discharge.
- Prevent the drain tube from having a rise in its piping.
- Do not bend or crush the drain tube. When installing the product, take care not to place the product on
the drain tube.
- For piping the drain tube to the back of the dryer, use the holder included as an accessory.
Holder
Drain tube
- For handling the condensate drain, follow the safety guide line and wear protective goggles,
apron and gloves.
- When oil is contained in the condensate drain, dangerous substances may be present.
Handle it following the bylaw or regulation of local government.
WARNING
- During the dryer operation, keep the ball valve open at all times. When the ball valve is closed,
the condensate drain cannot be discharged.
-
Keep the drain cock at “S” side. If the drain cock is at “O” side, compressed air continues to
bleed.
CAUTION
Open
O S