SMC Networks HRZ002-W1S-F, Operation Manual

Page: 131 / 196

HRX-OM-X010
Chapter 5 System Operation
HRZ Series 5.3 Operation Screen
5-9
5-9
5.3.6 Alarm Display screen
Figure 5-8 Alarm Display screen
In the event of an error in this system, the current screen is switched to the “Alarm Display screen” to display the
relevant alarm code,and message.
The “Alarm Display screen” is displayed only if an error is raised.
See section 6.2 “Troubleshooting” in “Chapter 6 Error Message and Troubleshooting” on page 6-2 for alarm
numbers and messages.
5.3.7 Menu screen
＜ＭＥＮＵ＞
１．ＳＥＴＴＩＮＧ
２．ＲＥＭＯＴＥ ＭＯＤＥ
３．ＭＡＩＮＴＥＮＡＮＣＥ
Figure 5-9 Menu screen
Table 5-7 Menu screen
No. Item Descriptions
1 SETTING
Switc
hes to the “Setting screen” with the press of the [ENT]
key.
2 REMOTE MODE
Switch
es to the “Mode Selection screen” with the press of
the [ENT] key.
3 MAINTENANCE
Switch
es to the “Initial Setting screen 1” with the press of
the [ENT] key.
[Tips]
[▲] or [▼]
key
is used for selecting “Item.”
2
1
3
POWER ON
POWER ON
＊＊＊ＡＬＡＲＭ＊＊＊ ↕
１１：Ｒｅｓｅｒｖｏｉｒ
Ｈｉｇｈ Ｔｅｍｐ ＷＲＮ