SMC Networks HRZ002-W1S-F, Operation Manual

Page: 142 / 196

HRX-OM-X010
Chapter 5 System Operation
5.3 Operation Screen HRZ Series
5-20
＜ＩＮＩＴＩＡＬ ＳＥＴ＞ ↕
ＰＵＭＰ ＩＶ ＦＬＯＷ
Ｐ．ＬＩＭＩＴ ＦＵＮＣ．ＯＦＦ
Ｐ．ＬＩＭＩＴ １．００ＭＰａ
5.3.18 Initial Setting screen 3
Figure 5-21 Initial Setting screen 3
Table 5-18 Initial Setting screen 3
No. Item Descriptions Setting Range Factory Default
1 PUMP IV
Allows the selection of the controlled object for
pump operation.
FREQ : Pump frequency control.
FLOW : Circulating fluid Flow rate control.
PRESS : Pump discharge pressure control.
FREQ
FLOW
PRESS
FLOW
2 P.LIMIT FUNC.
Allows the setting of pump discharge pressure
upper limit function (Valid : ON, Invalid : OFF).
OFF,ON OFF
3 P.LIMIT
Allows the setting of pump discharge pressure
upper limit value. This function enables the
pump discharge pressure not to exceed the
upper limit value to protect your system.
0.10 to 1.00MPa
15~145PSI
1.00MPa
145PSI
[Tips]
[▲] or [▼] key is used for selecting “Item” and move to other Initial Setting screens.
And pressing the [ENT] key enabling to select the setting or set value.
1
2
3
POWER ON