![background image](http://html.mh-extra.com/html/smc-networks/flst/flst_quick-start-manual_1300012003.webp)
Setting Up
1. Installation
There are two options:
•
Wall-mount -
Insert two screws into the wall-mount hole fixtures
•
Desktop -
Affix the 4 self-adhesive pads as indicated.
Under Panel View of Unit Housing
2. Setting MDI / MDI-X
Refer to TABLE 1 to configure the correct MDI or MDI-X setting.
TABLE 1
English
English
Features
• Complies with IEEE 802.3 10Base-T/FL standard
• MDI /MDI-X push button selection for RJ-45 port connection
• Supports half-duplex
• Status LEDs to easily monitor network configuration
• Extended distances up to 2km (6,600 ft)
• External power supply
• FCC Class A & CE approved
General Guide
Front Panel View
Rear Panel View
Fiber optic port
Status LED
indicators
UTP port
(RJ-45)
10BASE-T to Multi-mode 10BASE-FL Media Converter
MDI/MDI-X
push button
Self-adhesive
pads
Self-adhesive
pads
Holes for wall-mounting
Push-button on
front panel
3
4