Gardner Denver Driver Manual
Page 9 of 13
5.3
Client Side Map Descriptor Parameters
5.3.1 FieldServer Specific Map Descriptor Param eters
Column Title
Function
Legal Values
Map_Descriptor_Name Name of this Map Descriptor.
Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data is to
be stored in the FieldServer.
One of the Data Array names from
Section
Data_Array_Offset
Starting location in Data Array.
0
to
(Data_Array_Length-1)
as
specified in
Section
Function
Function of Client Map Descriptor.
RDBC, Passive_Client
5.3.2 Driver Related Map Descriptor Pa ram eters
Column Title Function
Legal Values
Node_Name
Name of Node to fetch data from.
One of the Node names specified in
Section
Gar_Cmd
Data poll commands.
Service_Data, Operating_Mode, Operating_Data
Gar_Data*
Data fields in a data poll
command response message.
Can be used to poll for all or
specific data or just isolate
s
pecific items in an “All” poll.
Service_Data:
All
, Advisories, Shutdown_codes,
Hourmeter_shutdown, Hourmeter_total,
Hourmeter_loaded, Hourmeter_temp,
Hourmeter_tmp_st, Last_maint_A, Last_maint_B,
Oilage
Operating_Mode:
All
, Oper_mode, Seq_number, Oper_state
Operating_Data:
All
, System_pressure, Filter_pressure,
Discharge_temp, Reservoir_temp, Motor_current
5.3.3 Tim ing Param eters
Column Title
Function
Legal Values
Scan_Interval*
Rate at which data is polled. Note that the Poll_Delay Connection
parameter affects the effective scan interval.
≥0.1s,
0.1s