background image

 

BACnet PTP Serial Driver Manual 

Page 20 of 34 

Appendix A.6. COV and Intrinsic Reporting 

The COV (Change of Value) and Intrinsic Reporting services are two distinct ways in which point values 
can  be  reported  to  a  client  workstation  as  they  change,  i.e.  in  an  event-driven  opposed  to  a  polling 
method. This can increase performance dramatically  compared to  polling  method alone. It also reduces 
network traffic significantly. 

The services are suited to different purposes: 

 

COV is suited to value updates. On analog points the sensitivity can be set using the COV_Increment 
property. Only changes larger than the COV_Increment value will be reported. 

 

Intrinsic  Reporting  is  used  for  alarming.  It  is  implemented  via  Notification_Class  objects,  which  can 
receive subscriptions from client  workstations that add themselves to the RecipientList property of a 
Notification_Class 

object. 

Notifications 

are 

done 

using 

ConfirmedEventNotification 

or 

UnconfirmedEventNotification.  Intrinsic  Reporting  also  allows  for  alarms  to  be  acknowledged  (using 
the  AcknowledgeAlarm  service)  and  for  all  subscribed  client  workstations  to  be  notified  of  alarm 
acknowledgements (using EventNotifications of type ACK_NOTIFICATION). 

Appendix A.6.1. Notes on COV Configuration 

 

No special configuration entries are needed to enable COVs. The service is enabled by default for all 
protocols  except  MSTP.  Most  client  workstations  will  automatically  subscribe  to  all  points  once  they 
discover that the FieldServer supports COV services. This only applies to BACnet Objects - Property 
subscribes are  not supported by  the FieldServer. COV only  works for BACnet  Map  Descriptors  with 
length set to 1. If length is not specified, then it defaults to 1, so this is only a problem where length 
has been specified as greater than 1. 

 

The Node_Option parameter can be configured to enable or disable COV. An example configuration 
is presented i

Appendix A.7.3

. 

 

For  analog  Server  Map  Descriptors,  the  user  may  optionally  configure  a  COV_Increment  value  to 
adjust the reporting threshold. If it is not set the COV_Increment defaults to zero. 

 

Change of Value (COV) Notifications are generated for all data objects for which a remote client has 
issued  a  SubscribeCOV-Request.  COV  subscription  is  on  a  per-point  basis.  The  SubscribeCOV-
Request regulates  whether Notifications are  Confirmed or Unconfirmed. The remote client may  also 
write the COV_Increment property in order to control the deadband for changes in analog values. The 
COV_Increment  property  can  be  initialized  via  the  configuration  file  by  setting  the  COV_Increment 
Map  Descriptor  Property.  The  value  set  by  the  configuration  is  an  initial  value  that  is  loaded  on 
startup. It would be replaced by any new value written by the Client. 

Appendix A.6.2. Notes on Intrinsic Reporting Configuration: 

 

Intrinsic  Reporting  is  managed  by  Notification  Class  objects.  At  least  one  Notification  Class  object 
must be configured for Intrinsic Reporting to work. 

 

Each Data_Object that is to be monitored by Intrinsic Reporting must be linked to a Notification Class 
object via the Notification_Class Map Descriptor Property. For analog points alarm limits must be set 
up, and for binary points, the Input_Alarm_State must be set up. 

 

The  Notification_Class  object  contains  properties  that  allow  a  client  workstation  to  modify  rules 
governing event reporting, such as Event_Type, days of week, start and end times etc. 

 

The RecipientLists are non-volatile, and subscriptions must be renewed on system restart. 

Summary of Contents for FieldServer FS-8700-16 BACnet PTP



































Reviews: