SMC Networks FGH Series, Operation Manual, Page: 6 / 12

6/12
FGX-OMZ0008
1. Parts Descriptions and Functions
2. Product Specifications
Table 1-1 Parts Descriptions and Functions
No Description Material Function
(1) Gasket PTFE
(2) Seal PTFE
(3) Seal PTFE
(4)
Hexagon head
bolt
SUS316 Plug to release air in the housing.
(5) Cover SUS316 The lid of the filter body.
(6) Clamp ring SUS316
Connects the case and cover, tightens
the cover.
(7) Element
Depends on the
element type
Collects residue.
(8) Case SUS316 Filter body.
(9) Plug SUS316 Drainage discharging plug.
Table 1-2 Replacement parts
No Descriptions
Model
FGH100 FGH200
FGH300
(1) Gasket AL-58S#1
(2) Seal AL-43S
(3) Seal AL-53S
*One of each (1) Gasket, (2) Seal and (3) Seal are used per filter.
*Use a commercially available belt wrench to attach or remove the
clamp ring.
Figure 1 Parts descriptions and functions
Table 2 Specifications
Model FGH100 FGH200 FGH300
Fluid
Various kind of liquid
(Industrial water, washing liquid, general solvent, etc.)
Port size(Rc) 3/8,1/2,3/4,1
Max. operating pressure
(MPa)
1.0
Max. operating temperature
(
o
C)
80 (below boiling point)
Number of elements 1
Element size(mm)
Note 1)
125 250 500
Differential pressure for
element replacement (MPa)
0.1
Materials
Note 2)
Cover SUS316
Case SUS316
Gasket/O-ring PTFE
Seal PTFE
Weight (kg)
Note 3)
2.6 3.2 4.3
Internal capacity (L) 1.0 1.8 3.3
Note 1) The element size is a nominal length.
Note 2) Fluororesin seal may lose its performance over time.
Please confirm the tightening torque periodically.
Note 3) Body only