C
OMPLIANCES
AND
S
AFETY
S
TATEMENTS
– 6 –
This information technology equipment complies with the requirements of the
Council Directive 2004/108/EC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 2006/95/EC for electrical
equipment used within certain voltage limits and the Amendment Directive
2006/95/EC. For the evaluation of the compliance with these Directives, the
following standards were applied:
RFI Emission:
◆
Limit class A according to EN 55022: 2006 (EMC)
◆
Limit class A for harmonic current emission according to EN 61000-3-2/
2000+A2:2005
◆
Limitation of voltage fluctuation and flicker in low-voltage supply system
according to EN 61000-3-3/1995+A1:2001+A2:2005
Immunity:
◆
Product family standard according to EN 55024:1998+A1:2001+A2:2003
◆
Electrostatic Discharge according to EN 61000-4-2: 2001 ED.1.2
(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)
◆
Radio-frequency electromagnetic field according to EN 61000-4-3: 2006
ED.3.0 (80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m)
◆
Electrical fast transient/burst according to EN 61000-4-4: 2004 ED.2.0 (AC/
DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV)
◆
Surge immunity test according to EN 61000-4-5: 2005 ED.2.0 (AC/DC Line
to Line: ±1 kV, AC/DC Line to Earth: ±2 kV)
◆
Immunity to conducted disturbances, Induced by radio-frequency fields: EN
61000-4-6: 2006 ED.2.2 (0.15 - 80 MHz with 1 kHz AM 80% Modulation: 3
V/m)
◆
Power frequency magnetic field immunity test according to EN 61000-4-8:
2001 ED.1.1 (1 A/m at frequency 50 Hz)
◆
Voltage dips, short interruptions and voltage variations immunity test
according to EN 61000-4-11: 2004 ED.2.0 (>95% Reduction @10 ms, 30%
Reduction @500 ms, >95% Reduction @5000 ms)
