![background image](http://html1.mh-extra.com/html/smc-networks/ez-switch-smcfs1601p/ez-switch-smcfs1601p_user-manual_1300332028.webp)
C
HAPTER
3
| Installing the Switch
Connecting Network Devices
– 28 –
P
OWERING
O
N
The SMCFS1601P switch is powered by connecting to an AC power supply using
a power cord. When powering on the switch, it automatically initializes and the
LED indicators respond as follows:
1.
All of the LED indicators flash momentarily for one second, which represents
a resetting of the system.
2.
The Power LED indicator turns on green.
C
ONNECTING
N
ETWORK
D
EVICES
This switch is designed to be connected to 10, or 100 Mbps network cards in PCs
and servers, as well as to other switches and hubs.
C
ABLING
G
UIDELINES
The RJ-45 ports on the switch support automatic MDI/MDI-X pinout
configuration, so you can use standard straight-through twisted-pair cables to
connect to any other network device (PCs, servers, switches, routers, or hubs).
Each device requires an unshielded twisted-pair (UTP) cable with RJ-45
connectors at both ends. Use Category 5 or better for 100BASE-TX connections,
and Category 3 or better for 10BASE-T connections.
N
OTE
:
The figure illustrates the application and principle. The power
plug in the package and the socket in your situation will comply with
regulations in your country, so they may differ from the figure above.
N
OTE
:
If you intend to connect the switch to ground through the PE
(Protective Earth) wire of the AC power cord, make sure the PE wire in
the electrical outlet is well grounded in advance.
Summary of Contents for EZ Switch SMCFS1601P
