![background image](http://html1.mh-extra.com/html/smc-networks/ez-switch-smc-ez109dt/ez-switch-smc-ez109dt_user-manual_1300324022.webp)
T
ROUBLESHOOTING
10
T
ROUBLESHOOTING
1. Symptom
Power LED does not light after power on.
Probable Causes
Power outlet or power cord may be defective.
Possible Solutions
•
Check for loose connections.
•
Check the power outlet by using it for another device.
•
Replace the power cord.
2. Symptom
Link LED does not light after connection is made.
Probable Causes
Switch port, network card or cable may be defective.
Possible Solutions
•
Check that the switch and attached device are both
powered on.
•
Be sure the network cable is connected to both devices.
•
Verify that Category 5 cable is used for 100 Mbps
connections and that the length of any cable does not
exceed 100 meters (328 feet).
•
Check the network card and cable connections for defects.
•
Replace the defective card or cable if necessary.
Summary of Contents for EZ Switch SMC-EZ109DT
