6
Hardware Installation
Warning:
Network cards are sensitive to static electricity. To
protect the card, avoid touching its electrical
components, and touch the ground often to equalize
the static charges, before handling the card.
1.
Find an available type II or type III CardBus slot in your laptop.
2.
With the Adapter’s 68-pin connector facing the CardBus slot,
and the “EZ-Stream” label facing up, slide the card completely
into the slot as shown below.
Note:
The SMC2336W-AG Wireless CardBus Adapter allows
you to “hot swap” the card any time, even when your
notebook is powered on.
3.
For Windows 98/Me/2000, CardBus specification is required.
Please check the documents for your CardBus adapter driver
before installing the driver and utility software for the
SMC2336W-AG adapter.