manualshive.com logo in svg

SMC Networks EZ Connect SMC8002CM, Installation Manual, Page: 28 / 34

Share
Download
SMC Networks EZ Connect SMC8002CM Installation Manual Download Page 28

      

SMC8002CM Installation Guide 

 

  

      

28 

 

Cable Modem Configuration

 

Click this option and the web user interface will display type, MAC address, IP 
address, subnet mask, gateway, serial number, Board ID, software version, hardware 
version, USB adapter name, USB MAC address, USB vendor ID and USB product 
ID of cable modem as shown in the example below. 

 

 

 

 

Cable Modem Status

 

Click this option and the web user interface displays the status of the cable modem 
and options for downstream status, upstream status and upstream burst descriptor.   
 
Click the option “downstream status” and the web user interface displays 
downstream status of the cable modem and options for cable modem status, upstream 
status and upstream burst descriptor.   
 
Click the option “upstream status” and the web user interface displays upstream 
status  of the cable modem and  options for cable modem status, downstream status 
and upstream burst descriptor.   

Summary of Contents for EZ Connect SMC8002CM



































Reviews:

No comments