![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-n-smcwusbs-n4/ez-connect-n-smcwusbs-n4_user-manual_1298970032.webp)
– 32 –
4
WPS C
ONFIGURATION
The WPS (Wi-Fi Protected Setup) function allows you to add a new wireless
device to an existing network quickly.
N
OTE
:
The WPS function is not supported in Windows 7.
If the wireless card supports Wi-Fi Protected Setup (WPS), you can
establish a wireless connection between wireless card and router using
either the Push Button Configuration (PBC) method or PIN method.
First, the WPS software should be installed. Follow these steps:
1.
Insert the Resource CD into your CD-ROM drive.
2.
Double-click My Computer, and then double-click the CD/DVD drive
where the installation CD was placed.
3.
Open the SMCWUSBS-N4 folder, and double-click “wps.exe.” The
following figure (
Figure 24
) displays.
Figure 24: Prepare to Install WPS
4.
Follow the step-by-step instructions to complete the WPS installation.
When completed, the WPS function can be enabled. The following sections
describe the two ways to use WPS.