background image

L

IMITED

 W

ARRANTY

IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING 
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER 
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH 
THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC 
SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND 
EXAMINATION DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT 
EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, 
NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS 
TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED 
USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN CONTRACT OR 
TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL, 
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, 
OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS 
ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, 
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS 
PRODUCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGES. 

SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR 
THE LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR 
CONSUMER PRODUCTS, SO THE ABOVE LIMITATIONS AND EXCLUSIONS MAY 
NOT APPLY TO YOU. THIS WARRAN’Y GIVES YOU SPECIFIC LEGAL RIGHTS, 
WHICH MAY VARY FROM STATE TO STATE. NOTHING IN THIS WARRANTY 
SHALL BE TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* SMC will provide warranty service for one year following discontinuance from the 
active SMC price list. Under the limited lifetime warranty, internal and external 
power supplies, fans, and cables are covered by a standard one-year warranty from 
date of purchase.

SMC Networks, Inc.

SMC Networks, Inc.

6 Hughes

Irvine, CA 92618

Summary of Contents for EZ Card1000































































Reviews: