SMC Networks EliteConnect SMCE21011, User Manual, Page: 233 / 258

C
HAPTER
29
| VLAN Commands
– 233 –
C
OMMAND
D
ESCRIPTION
◆
When VLANs are enabled, the access point tags frames received from
wireless clients with the VLAN ID configured for each client on the
RADIUS server. If the VLAN ID has not been configured for a client on
the RADIUS server, then the frames are tagged with the access point’s
native VLAN ID.
◆
Traffic entering the Ethernet port must be tagged with a VLAN ID that
matches the access point’s native VLAN ID, or with a VLAN tag that
matches one of the wireless clients currently associated with the access
point.
E
XAMPLE
AP(config)#vlan enable
Reboot system now? <y/n>: y
R
ELATED
C
OMMANDS
management-vlanid (233)
management-vlanid
This command configures the management VLAN ID for the access point.
S
YNTAX
management-vlanid <vlan-id>
vlan-id - Management VLAN ID. (Range: 1-4094)
D
EFAULT
S
ETTING
1
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The management VLAN is for managing the access point. For example, the
access point allows traffic that is tagged with the specified VLAN to manage
the access point via remote management, SSH, SNMP, Telnet, etc.
E
XAMPLE
AP(config)#management-vlanid 3
AP(config)#
R
ELATED
C
OMMANDS
vlan (232)