SMC Networks EliteConnect SMCE21011, User Manual

Page: 224 / 258

C
HAPTER
27
| Wireless Security Commands
– 224 –
wpa-pre-shared-key
This command defines a Wi-Fi Protected Access (WPA/WPA2) Pre-shared-
key.
S
YNTAX
wpa-pre-shared-key <hex | passphrase-key> <value>
hex - Specifies hexadecimal digits as the key input format.
passphrase-key - Specifies an ASCII pass-phrase string as the
key input format.
value - The key string. For ASCII input, specify a string between 8
and 63 characters. For HEX input, specify exactly 64 digits.
C
OMMAND
M
ODE
Interface Configuration (Wireless-VAP)
C
OMMAND
U
SAGE
◆
To support WPA or WPA2 for client authentication, use the auth
command to specify the authentication type, and use the wpa-
preshared-key command to specify one static key.
◆
If WPA or WPA2 is used with pre-shared-key mode, all wireless clients
must be configured with the same pre-shared key to communicate with
the access point’s VAP interface.
E
XAMPLE
AP(if-wireless g: VAP[0])#wpa-pre-shared-key ASCII agoodsecret
AP(if-wireless g)#
R
ELATED
C
OMMANDS
auth (218)
pmksa-lifetime
This command sets the time for aging out cached WPA2 Pairwise Master
Key Security Association (PMKSA) information for fast roaming.
S
YNTAX
pmksa-lifetime <minutes>
minutes - The time for aging out PMKSA information. (Range: 0 -
14400 minutes)
D
EFAULT
S
ETTING
720 minutes
C
OMMAND
M
ODE
Interface Configuration (Wireless-VAP)