SMC Networks EliteConnect SMCE21011, User Manual, Page: 177 / 258

– 177 –
21
MAC A
DDRESS
A
UTHENTICATION
C
OMMANDS
Use these commands to define MAC authentication on the access point. For
local MAC authentication, first define the default filtering policy using the
address filter default command. Then enter the MAC addresses to be
filtered, indicating if they are allowed or denied. For RADIUS MAC
authentication, the MAC addresses and filtering policy must be configured
on the RADIUS server.
address filter
default
This command sets filtering to allow or deny listed MAC addresses.
S
YNTAX
address filter default <allowed | denied>
allowed - Only MAC addresses entered as “denied” in the address
filtering table are denied.
denied - Only MAC addresses entered as “allowed” in the address
filtering table are allowed.
D
EFAULT
allowed
C
OMMAND
M
ODE
Global Configuration
E
XAMPLE
AP(config)#address filter default denied
AP(config)#
Table 19: MAC Address Authentication
Command Function Mode Page
address filter default Sets filtering to allow or deny listed addresses GC 177
address filter entry Enters a MAC address in the filter table GC 178
address filter delete Removes a MAC address from the filter table GC 178
mac- authentication
server
Sets address filtering to be performed with local
or remote options
GC 179
mac- authentication
session-timeout
Sets the interval at which associated clients will
be re-authenticated with the RADIUS server
authentication database
GC 179
show authentication Shows all 802.1X authentication settings, as
well as the address filter table
Exec