SMC Networks EliteConnect SMCE21011, User Manual, Page: 148 / 258

– 148 –
15
S
YSTEM
C
LOCK
C
OMMANDS
These commands are used to configure SNTP and system clock settings on
the access point.
sntp-server ip
This command sets the IP address of the servers to which SNTP time
requests are issued. Use the this command with no arguments to clear all
time servers from the current list.
S
YNTAX
sntp-server ip <1 | 2> <ip>
1 - First time server.
2 - Second time server.
ip - IP address of an time server (NTP or SNTP).
D
EFAULT
S
ETTING
137.92.140.80
192.43.244.18
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
When SNTP client mode is enabled using the sntp-server enable
command, the sntp-server ip command specifies the time servers from
which the access point polls for time updates. The access point will poll the
time servers in the order specified until a response is received.
Table 13: System Clock Commands
Command Function Mode Page
sntp-server ip Specifies one or more time servers GC 148
sntp-server
enable
Accepts time from the specified time
servers
GC 149
sntp-server
date-time
Manually sets the system date and time GC 149
sntp-server
daylight-saving
Sets the start and end dates for daylight
savings time
GC 150
sntp-server
timezone
Sets the time zone for the access point’s
internal clock
GC 150
show sntp Shows current SNTP configuration
settings
Exec 151