Step 7:
Once all the necessary files are copied from the Windows CD, the driver install process
will be complete. Click [Finish] to exit the wizard.
Step 8:
You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the
SMC2532W-B will be initialized and ready for use.
Section 5.2 |Windows Me
NOTE:
Installation processes will require the use of your original, licensed copy of Windows.
Please have your Windows CD available BEFORE proceeding with the installation.
Step 1:
After you have inserted the SMC2532W-B in your machine and turned it back on, the OS
will automatically recognize the adapter and prompt you for the appropriate drivers. Select the
[Specify the location of the driver] option. Then click the [Next >] button to begin the
installation.
Step 2:
Insert the Driver CD and select the [Specify a location:] option. Clear the [Removable
Media] checkbox. Then press the [Browse] button and look for the drivers on your CD. This
should be located in ?:\driver. (Note: The ? equals the letter of your CD-ROM drive. In most
cases, this is
D
.) Then click [Next >].
Step 3:
The system should find the drivers. Click the [Next >] button to continue the installation.
(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display
a list of all the drivers] option. Select [Network Adapters] from the list of devices, press [Have
Disk] and once again browse to the location of the drivers)
Step 4:
Once all the necessary files have been copied, the driver installation is complete. Click
[Finish] to exit the wizard.
Step 5:
You will then be prompted to reboot the machine. Press [Yes]. Upon reboot, the
SMC2532W-B will be initialized and ready for use.
Section 5.3 | Windows 2000
Step 1:
After you have inserted the SMC2532W-B in your machine and turned it back on, the
Operating System will automatically recognize the adapter and prompt you for the appropriate
drivers. Click the [Next >] button to begin the installation.
Step 2:
Insert the Driver CD and select the [Search for a suitable driver...] option. Then click
[Next >].
Step 3:
Clear all checkboxes except for [Specify a location]. Then click [Next >].
Step 4:
You will then be prompted to enter the location of the drivers. This should be ?:\driver.
(Note: The ? equals the letter of your CD-ROM drive. In most cases, this is
D
.) Then click [OK].
