BROADBAND
MODEM
Current Setup
Barricade
TM
Setup
COMPUTER
ETHERNET CABLE
CABLE
OR DSL
BROADBAND
MODEM
BARRICADE
ROUTER
ETHERNET CABLE
POWER CORD
ETHERNET CABLE
CABLE
OR DSL
COMPUTER
1
1
2
2
3
3
4
4
Finally, when you have connected
both your Broadband modem and
computer to the Router, you can
connect the Barricade
TM
s power cord
into an available electrical outlet
.
Unplug your existing Broadband
Modem s Ethernet cable from the
back of your computer.
Connect this same Ethernet
cable connector to the WAN/ port
on the Barricade
TM
Router.
Using the Ethernet cable
included in the box, connect one
end to LAN Port-1 on the
Barricade
TM
Router and then
connect the other end to the
Ethernet port connection on your
computer.
Barricade
TM
VPN
4-Port Broadband Router
EZ Installation CD
Using The EZ 3-Click Wizard
Hardware installation
Congratulations on your purchase of the Barricade™ VPN 4-Port Broadband Router (SMCBR14VPN). This EZ Quick Installation Guide will guide you through a simple process
to get your new Barricade™ Router online in 3 mouse clicks. For additional information and advanced settings configurations please refer to the User Guide included on
the CD-ROM.
Before you can use the EZ 3-Click Wizard you need to connect your new Barricade™ Router to your Broadband Modem and to at least one computer. To setup your initial network,
follow the steps below:
When you have completed the network setup outlined in the previous section, put
the SMC EZ Installation and Documentation CD into your CD-ROM drive.
For initial setup, it is recommended that you use the EZ 3-Click Install Wizard on
the computer that was originally connected to your Broadband Internet connection.
The EZ 3-Click Wizard should auto-run to display the splash screen below. If it does not
browse the contents of your CD-ROM drive and double-click on the Router icon.
To begin the installation of your new Barricade™ Router, click the [Start EZ 3-Click
Wizard] button.
Note:
The EZ 3-Click Installation wizard only works on a Windows-based computer.
If you are using any other operating system, please configure the Barricade™
through the web-based interface.
Macintosh / Linux Users!
If you are setting up this Router in a non-Windows network environment,
please refer to the User Guide located in the manual folder on the CD-ROM.
The EZ 3-Click Installation Wizard is not compatible with the Mac or Linux OS.
Barricade
TM
Web Management:
You can access the web-based management tools using a java-enabled web browser
by typing http://192.168.2.1 in the Browser Address bar.
If you are unable to access the web-based management, please refer to the User Guide
to confirm your web-browser is configured correctly.
Default Settings:
Router IP Address: 192.168.2.1
Default Password: smcadmin
Quick Installation Guide
SMCBR14VPN
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of
patents or other rights of third parties, which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of SMC.
SMC reserves the right to change specifications at any time without notice.
Copyright© SMC Networks, Inc., 2004. All rights reserved.
SMC is a registered trademark; and Barricade
TM
is a trademark of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their
respective holders.
