SMC Networks Barricade SMCWGBR14-N, User Manual

Page: 32 / 131

29
5. Select the Protocol (for example
TCP
).
6. Ensure the schedule is set to
Always
7. Click
Save
to add the settings to the Virtual Servers List
8. Repeat these steps for each Virtual Server Rule you wish to add. After the list
is complete, click
Save Settings
at the top of the page.
With this Virtual Server entry, all Internet traffic on Port 8888 will be redirected to your
internal web server on port 80 at IP Address 192.168.2.50.
Virtual Server Parameters
Name
Assign a meaningful name to the virtual server, for example
Web Server
.
Several well-known types of virtual server are available from the "Application
Name" drop-down list. Selecting one of these entries fills some of the remaining
parameters with standard values for that type of server.
IP Address
The IP address of the system on your internal network that will provide the
virtual service, for example
192.168.2.50
. You can select a computer from the
list of DHCP clients in the "Computer Name" drop-down menu, or you can
manually enter the IP address of the server computer.
Protocol
Select the protocol used by the service. The common choices -- UDP, TCP, and
both UDP and TCP -- can be selected from the drop-down menu. To specify any
other protocol, select "Other" from the list, then enter the corresponding protocol
number (
as assigned by the IANA ) in the
Protocol
box.
Private Port
The port that will be used on your internal network.
Public Port
The port that will be accessed from the Internet.
Inbound Filter
Select a filter that controls access as needed for this virtual server. If you do not
see the filter you need in the list of filters, go to the
Advanced → Inbound Filter
screen and create a new filter.
Schedule
Select a schedule for when the service will be enabled. If you do not see the
schedule you need in the list of schedules, go to the
Tools → Schedules screen
and create a new schedule.