manualshive.com logo in svg

SMC Networks Barricade SMCWBR14S-N, User Manual

Share
Download
SMC Networks Barricade SMCWBR14S-N User Manual Download Page 23

ISP S

ETTINGS

2-5

The Barricade contains the following ports and buttons:

ISP Settings

If you are not sure of your connection method, please contact your 
Internet Service Provider. There are several connection types to choose 
from: Static IP, DHCP, PPPoE, PPTP and L2TP. 

Note:

If using the PPPoE option, you will need to remove or disable any 
PPPoE client software on your computers. 

Item

Description

LAN Ports

Fast Ethernet ports (RJ-45). Connect devices on your local 

area network to these ports (i.e., a PC, hub, switch or IP set 

top box).

WAN Port

WAN port (RJ-45). Connect your cable/xDSL modem line to 

this port.

Reset Button

Use this button to reset the power and restore the default 

factory settings. To reset without losing configuration settings, 

see “Reset” on page 4-64.

Power Inlet

Connect the included power adapter to this inlet.

Warning

: Using the wrong type of power adapter may cause 

damage.

WPS Button 

(on top panel)

Press this button for over 4 seconds to start using the WPS. 

Summary of Contents for Barricade SMCWBR14S-N






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands