![background image](http://html1.mh-extra.com/html/smc-networks/barricade-smcbr-18vpn/barricade-smcbr-18vpn_user-manual_1300285053.webp)
8 | IPSec Settings Guide (For Reference/Example Only)
8.1 | Tunnel between two SMCBR14VPN
The easiest way to construct a VPN tunnel between two sites is to use two SMCBR14VPNs,
which are connected to the internet.
The steps to follow to create an IP tunnel between are the following:
•
Step 1: Go to the VPN section and select the enable checkbox for [VPN]
•
Step 2: Select the number of Tunnels you want to enable
•
Step 3: Enter a Tunnel Name, select IKE or MANUAL for the method and click [More]
•
Step 4: Local subnet value is the LAN SUBNET
•
Step 5: Local netmask value is the LAN SUBNET MASK
•
Step 6: Remote subnet value is the LAN SUBNET of the REMOTE NETWORK
•
Step 7: Remote netmask value is the LAN SUBNET MASK of the REMOTE NETWORK
•
Step 8: Remote gateway value is the WAN IP of the REMOTE NETWORK
•
Step 9: Preshare key value is used to determine the network encryption
•
Step 10: SAVE SETTINGS and then configure the IKE PROPOSAL and IPSEC
PROPOSAL
8.1.1 | Settings for Router 1
VPN Router
1
WAN IP Address: ip1.smc.com
LAN IP Address: 192.168.1.1
PC 192.168.1.xxx
47