C
HAPTER
4
| Configuring the Router
Operation Mode
– 49 –
Figure 31: WPS-Enter a PIN from my access point
N
OTE
:
The default PIN code of the Router can be found on its label, or in
the WPS configuration screen, as shown in
.
Then the new device successfully connected to the network.
N
OTE
:
The WPS LED on the Router will turn on green for five minutes when
a device has been successfully added to the network.
N
OTE
:
The WPS function cannot be configured if the wireless function of the
Router is disabled. Make sure the wireless function is enabled before
configuring WPS.
O
PERATION
M
ODE
The Router supports two operation mode types: Wireless Router and
Wireless Client Router mode. Click Save to save your choice, which is
shown as
Figure 32: Operation Mode
