C
HAPTER
3
| Quick Installation Guide
Quick Installation Guide
– 34 –
Figure 8: Quick Setup
3.
Click Next. The WAN Connection Type page will appear, as shown in
Figure 9: Choose the WAN Connection Type
The Router provides an auto-detect function and supports three popular
ways (PPPoE, Dynamic IP, and Static IP) to connect to the Internet. It is
recommended that you make use of the auto-detect function. If you are
sure of what kind of connection type your ISP provides, you can select the
type and click Next to go on configuring.
4.
If you select auto-detect, the Router will automatically detect the
connection type your ISP provides. Make sure the cable is securely
plugged into the WAN port before detection. The appropriate
configuration page will be displayed when an active Internet service is
successfully detected by the Router.
a.
If the connection type detected is PPPoE, the screen shown in
will display.
