C
HAPTER
4
| Configuring the Router
Wireless
– 65 –
■
Version
- you can choose the version of the WPA security on the
pull-down list. The default setting is Automatic, which can select
WPA (Wi-Fi Protected Access) or WPA2 (WPA version 2)
automatically based on the wireless station's capability and request.
■
Encryption
- You can select either Automatic, TKIP, or AES.
N
OTE
:
If you check the WPA/WPA2 radio button and choose TKIP
encryption, you will find a notice in red, as shown in
Figure 45: WPA/WPA2-Enterprise
■
Radius Server IP
- Enter the IP address of the RADIUS Server.
■
Radius Port
- Enter the port that the RADIUS service uses.
■
Radius Password
- Enter the password for the RADIUS server.
■
Group Key Update Period
- Specify the group key update interval
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
◆
WPA/WPA2 Personal
- The WPA/WPA2 authentication type based on
a pre-shared passphrase.
■
Version
- You can choose the version of the WPA-PSK security from
the drop-down list. The default setting is Automatic, which can
select WPA-PSK (Pre-shared key of WPA) or WPA2-PSK (Pre-shared
key of WPA2) automatically based on the wireless station's
capability and request.
■
Encryption
- When WPA-PSK or WPA is set as the Authentication
Type, you can select either Automatic, TKIP, or AES as the
encryption type.
N
OTE
:
If you check the WPA-PSK/WPA2-PSK radio button and choose TKIP
encryption, you will find a notice in red, as shown in
