1-2) Element Replacement - Assembly [AMD30]
Step 1
Step 2
Mount the element so that the arrow mark on top of the element and
the joint lock button are in the position shown below. If they are
forced to be inserted without aligning, the element will break.
While the lock button is held down, mount the
body and joint where their marks meet .
Rotate the joint until the lock button meets
the body groove (approx. 30
o
).
[
Step 2]
[Step 1]
Correct direction to insert the
element.
Align the arrow marks in the
groove of the joint.
Element
assembly
Assemble
[Step 1]
Assemble
Body
Lock button
Align the mating mark
Mating mark
of the joint
Mating mark of the body
Position of the lock button
and the arrow mark.
Confirm the lock
button is locked to
the flute of the
product before it
pressurizes it.
[
Step 2]
Align the arrow marks in the
groove of the joint.
Bowl
assembly
Note
Rotate
for 30
degrees
Joint
Lock button
-19-