-27-
3.2) Element assembly - assembly [AM30, AM40]
Step 1
Step 2
Aligh 2 arrow marks and 2 recessed areas of the joint.
Press the element downward until the element and
joint come into contact with each other completely. If
they are forced to be inserted without aligning, the
element will break.
Step 3
While the lock button is held down, mount the body and joint where their marks meet. Rotate the joint until the
lock button meets the body groove (approx. 30 degrees).
④
Bowl assembly
① Element assembly
①
Element assembly
Joint
Recessed area
of the joint
(2 places)
Arrow mark of
the element
(2 places)
Assemble
Make sure that
the joint and
element contact
completely
Body
Joint
Lock button
Mating mark of the joint
Mating mark of the body
30
degrees
Rotation
Assemble
[Step 1]
[Step 2]
Caution
Make sure that the lock
button is locked to the
grove of the product
before pressurizing it.