manualshive.com logo in svg

SMC Networks 7904WBRB2, Manual

Share
Download
SMC Networks 7904WBRB2 Manual Download Page 76

C

ONFIGURING

 

THE

 ADSL R

OUTER

4-32

VLAN

VLANs are organized and controlled by VLAN Profiles. Up to 4 VLAN 
profiles can be created. Once a VLAN profile is created, you should add 
interfaces into the VLAN by changing the VLAN setting of that interface. 
Please note that only those interfaces of IEEE 802 bridging type (ex. LAN 
ports and 1483 Bridging PVCs) can be added to a VLAN.

 

IP Address Pool

Start IP Address Specify the start IP address of the DHCP pool. Do not include 

the IP address of the Barricade in the client address pool. If you 

change the pool range, make sure the first three octets match 

the gateway’s IP address, i.e., 192.168.2.xxx.

End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here. Otherwise, 

leave this field blank.

Parameter

Description

Summary of Contents for 7904WBRB2



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands