![background image](http://html1.mh-extra.com/html/smc-networks/7904wbra-n-fiche/7904wbra-n-fiche_user-manual_1300220124.webp)
E
THERNET
C
ABLE
B-3
Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for
transmitting data, and pins 3 and 6 for receiving data.
Straight-Through Wiring
If the port on the attached device has internal crossover wiring (MDI-X),
then use straight-through cable.
RJ-45 Pin Assignments
Pin Number
Assignment
1
1
Tx+
2
Tx-
3
Rx+
6
Rx-
1: The “+” and “-” signs represent the polarity of the wires
that make up each wire pair.
Straight-Through Cable Pin Assignments
End 1
End 2
1 (Tx+)
1 (Tx+)
2 (Tx-)
2 (Tx-)
3 (Rx+)
3 (Rx+)
6 (Rx-)
6 (Rx-)
Summary of Contents for 7904WBRA-N FICHE
