manualshive.com logo in svg

SMC Networks 7904BRA FICHE, Manual

Share
Download
SMC Networks 7904BRA FICHE Manual Download Page 50

S

ETUP

 W

IZARD

4-5

Parameters Setting

Select your Country and Internet Service Provider. This will automatically 
configure the Barricade ADSL Router with the correct Protocol, 
Encapsulation type and VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed you will need to 
manually enter settings. Go to “Parameter Setting - Country or ISP Not 
Listed” on page 4-8 in the manual.

   

If your ISP uses PPPoA or PPPoE, then you will need to enter the user 
name, password and DNS Server address supplied by your ISP.

If your ISP uses 1483 Routing, then you will need to enter the IP address, 
Subnet Mask, Default Gateway and DNS Server address supplied by your 
ISP.

Note:

By default 192.168.2.1 is set for the DNS Server address, this 
needs to be changed to reflect your ISP’s DNS Server address.

Click “NEXT” to continue.

Summary of Contents for 7904BRA FICHE


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands