![background image](http://html1.mh-extra.com/html/smc-networks/6709fl2-int-fiche-technique/6709fl2-int-fiche-technique_management-manual_1300171050.webp)
C
ONFIGURING
THE
S
WITCH
3-28
Port-based VLANs
Port-based VLANs are typically used to reduce broadcast traffic and to
increase security. A group of network users assigned to a VLAN form a
broadcast domain that is separate from other VLANs configured on the
switch. Packets are forwarded only between ports that are designated for
the same VLAN. Port-based VLANs can be used to manually isolate user
groups or subnets. However, you should use IEEE 802.3 tagged VLANs
with GVRP whenever possible to fully automate VLAN registration.
Web
– Click Administrator=>Switch Settings=>Advanced. Set VLAN
Operation Mode to Port Based, then click Apply.
Click Administrator=>VLAN Configuration. Click Add to create a group.
Enter the VLAN Name (1-15 characters) and Group ID (1-4094). Use the
Add or Remove buttons to configure port members, then click Apply.
Summary of Contents for 6709FL2 INT - FICHE TECHNIQUE
