English
English
1. Switch off the computer, unplug the power cord, and remove
the computer’s cover.
2. Select an unused PCI bus-master slot and remove its protective
bracket.
3. Carefully insert the card and press until all the edge connectors
are firmly seated inside the slot. Then, screw the card’s bracket
securely into the PC’s chassis.
4. Install the appropriate network driver for your operating
system. Drivers can be found on the driver diskette. See “Driver
Installation” for more information.
5. Install the configuration program for your wireless PCI adapter.
The SETUP.EXE file can be found on the utility diskette. See
“Configuration and Diagnostic Utility” (page 20) for more
information.
Driver Installation
The diskette labeled ”driver Diskette” that comes with the package
contains all the software drivers available for the EZ Connect
Wireless PCI Card. Select the driver you need for your system and
refer to this guide for the installation and configuration procedure.
Any new or updated drivers can be downloaded from SMC’s Web
site at
http://www.smc.com.
Windows 95/98/2000 Installation
1. Windows 95/98/2000 will automatically detect the new
hardware and prompt you to install the driver Click “Next” to
find the driver.
2. Insert the floppy disk labeled “driver Diskette” specify the
location “A:\” and click ”next”
USER GUIDE SMC2602W_UK.qxd 5/4/01 10:49 am Page 7
