SMC Networks 10/100 Mbps, User Manual

Page: 26 / 54

I
NSTALLATION
16
7. Choose the location where the program icons will be located and click
“Next”.
8. Check the “To launch EtherGuard” box and click “Finish” to
complete the installation and launch the EtherGuard program.
The EtherGuard program may also be started by clicking “Start/
Programs/EtherGuard/Etherguard”. The program will start and then run
in the background. A globe icon will appear on the toolbar (see the figure
on the next page). Double-click the icon to bring the program to the
foreground.
See the following section for EtherGuard configuration instructions, or go
to “WiNeTool” on page 23 for WiNeTool configuration instructions.