7
5.
Limitation of liability
We will accept no responsibility for damage to PV modules of any kind.
Before using SMB SOLAR MULTIBOARDS users must make sure that the PV
modules have been installed correctly. In particular, users must ensure that the
mounting brackets connecting the PV modules to the substructure have been securely
fastened so that modules cannot slip out of position. The maximum load of the PV
modules must not be exceeded.
6.
General information
SMB SOLAR MULTIBOARDS must be kept clean at all times. Each board must be
inspected to ensure that it is in proper working order before being used on framed PV
modules. This includes an inspection of the clip retainers and the backing layer and a
general check for distortion of the board.
When cleaning PV arrays do not direct the jet of the high-pressure washer at the
backing layer on the contact surface as this may damage it. When storing the SMB
SOLAR MULTIBOARDS please ensure that the backing layers or the non-slip
surfaces of two SMB SOLAR MULTIBOARDS are always stacked on top of each
other to prevent damage to the SMB SOLAR MULTIBOARDS.
Service and repairs may only be carried out by the manufacturer:
SMB SOLAR MULTIBOARD
Oberstr. 7
52388 Nörvenich
www.solar-multiboard.de
