background image

 

 

Technical Information 

 

Trampoline 

“modulus 90” 

page 1 

 

Installation instructions  

EN 1176-1 

Maintenance instructions  EN 1176-1 

 

03.04.2018

 

 
General 

 

The work described must be carried out by a qualified person. 

 

Due to the heavy weight of the completed trampoline, no further anchorage is necessary. 
The trampoline is designed 

to build levelled with the ground.

 

 
 
 
 

Dimensions  
 

Overall size: 

 

see draft plan 

Minimum space: 

see draft plan 

Jumping area:   

1,37m² 

 
Clearance:  

 

1,50 m 

 
Max. free fall height:  

0,90 m 

 
 
 
 
 
 

Age group 

3 years and up 
 
 
 

Number of users 

1 person  
 
 

Ground conditions 

Please refer to DIN EN 1176-1 for ground conditions in the play area. 

We recommend synthetic fall protection, as loose fall protection material like sand, bark mulch or 
wood chips can fall easily into the trampoline and thus minimize the play value.  

 
Installation tools

 

– tools supplied

 

 
6 pieces 

support iron rings 

1 piece 

Tool to assemble and/or remove jumping mats 

 

Example Picture: 

Trampolin „modulus 90“ traffic orange 
BUNTE HÜPFER 
colortramp® 
Artikelno. 7232001-E

 

Summary of Contents for Modulus 90

Page 1: ... see draft plan Jumping area 1 37m Clearance 1 50 m Max free fall height 0 90 m Age group 3 years and up Number of users 1 person Ground conditions Please refer to DIN EN 1176 1 for ground conditions in the play area We recommend synthetic fall protection as loose fall protection material like sand bark mulch or wood chips can fall easily into the trampoline and thus minimize the play value Instal...

Page 2: ...lines and an even horizontal surface has been created If there is a bad soil situation e g loamy soil we recommend a drainage layer Boreholes sealed with plugs which are for the six supporting iron rings supplied are located on the sides of the frame Please make sure to close these boreholes again It has to be ensured that the framework is lying snug and does not wobble This can be checked simply ...

Page 3: ...ded mat from the top image 3 To do this the hock is suspended in the eye of the tension spring which opens from the bottom and slowly pulled onto the rope which is fastened onto the hook If the spring extends enough then the eye which is suspended on the jumping mat falls down automatically It is the same procedure for the side of the thimble image 2 Assembly of the jumping mat When assembling the...

Page 4: ...hs Check unit for general damage or wear and tear Check condition of the jumping mat spring suspensions and protective panels Main inspection The trampoline framework consists of galvanised sheets 3 mm thick Due to this fact a main inspection which then includes checking the framework for corrosion only needs to be carried out every two years Type Plate Location The type plate is located in one of...

Reviews: