30
G-Sensor setting
If G-sensor sensitivity
value is high (8 or 9), it
may be too sensitive, it
will detect even a light
impact or light turn. If G-
sensor sensitivity value
is a low setting (1 or 2),
it might not detect a
notable incident.
Sensitivity should be set
in consideration of a
vehicle’s suspension and
also the road condition.
Drive Recorder has an internal GPS supporting the automatic GPS Time
Synchronize function. The time recording is done based on UTC at the Drive
Recorder and automatically converts to the local time at the PC according to
the PC time zone setting when playing back using the PC Viewer.
So basically no need to change time here but if you hope to set time manually
use this menu.
If you use a NEW SD Memory card, initializing must be done first.
STEP1. Insert new SD memory card into
the PC.
STEP2. Run “PC Viewer Drive Recorder”
STEP3. Select [ ] setting viewer program
and then click [Init SD card]
We recommend the [Init SD card] at least once per month to reduce the
possibility of any software errors.
Drive Recorder Settings
