Smarty BX1000 Plus, User Manual

Page: 10 / 31

FUNCTION
Automatic start
Connect your vehicle
’
s power cord to the BX1000/BX1000 Plus after starting
the vehicle. Then BX1000/BX1000 Plus will be automatically started. (Use
the provided power cord.)
Event record
The event recording will be automatically started by G-sensor.
G-sensor sensitivity can be set with your PC.
Each event file contains 15 seconds prior & 5 seconds post event.
Manual record
Press the [RECORD] button to begin recording manually. Each manual file
contains 15 seconds prior to activation & 5 seconds post activation.
SD Memory Card Format
Remove the power first. Press the [SD CARD FORMAT] button and hold
Then connect the power for initialization.
Once it done, all video & log files will be deleted.
And the configurations will default to the factory settings.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, BX1000/BX1000 Plus creates the last
file using the internal Super Capacitor.
11
Notice : The unit will not start recording immediately after power on.
It takes around 1 minute for the built-in power backup system to charge.
Thereafter, the internal flash memory will be ready to record.
BLUE LED (RECORD)
The blue LED shows the power is on.
The blue LED blink during recording.
RED LED (OVERWRITE)
The red LED will be turned on during overwriting.
Buzzer
“Beep” sound will occur when recording starts and to signal a system error.